Putting an overgrip on properly is what separates a comfortable grip from one that wrinkles and peels off after two weeks. You need nothing special, but you do need to do it in the right order. All the gear is in our grips and overgrips category.
Here are the five steps, what you need, the most common mistakes, how often to change it and three overgrips in stock today in the shop.
How do you put on an overgrip, step by step?
- Where to start: with the narrow end of the overgrip, stuck to the base of the handle, next to the butt cap.
- How to wrap: in a spiral upwards, overlapping 2 or 3 mm each turn with light, even tension.
- How to finish: cut the excess and fix the end with the adhesive tape that comes in the pack.
- It goes over the original grip: you only remove the old overgrip; the racket grip stays underneath.
- The three overgrips in this article are in stock today; you can check each product page.
How do you put an overgrip on a padel racket? ↑ index
You start with the narrow end of the overgrip at the base of the handle, next to the butt cap, and wrap upwards in a spiral with a 2 to 3 mm overlap and light tension. At the top you cut the excess and fix it with the finishing tape from the pack.
The overgrip goes over the original grip, so there is nothing to take apart: just remove the old overgrip if there is one. Done calmly, it takes about three minutes.
Step by step: how to wrap the overgrip ↑ index
Five steps, always in this order. One step, one action.
Step 1 · Remove the old one and clean: unwrap the used overgrip taking care not to damage the grip, and leave the handle clean and dry.
Step 2 · Prepare the new one: remove the film, find the narrow end (the one with the adhesive) and peel it off.
Step 3 · Start at the bottom: stick the narrow end to the base of the handle, next to the butt cap, firmly so it does not move.
Step 4 · Spiral upwards: turn upwards overlapping 2 or 3 mm each time, with light, even tension and parallel lines, so the thickness is the same along the whole handle.
Step 5 · Finish at the top: cut the excess and fix the end with the adhesive tape that comes in the pack, with no edge left raised.
What do you need to put on an overgrip? ↑ index
Almost nothing: a new overgrip and a couple of minutes.
A new overgrip: with its finishing tape included in the pack. We cover them below.
Scissors: to cut the excess at the end, if the overgrip does not come pre-cut.
Dry hands and a clean handle: the overgrip sits better on a grip free of sweat and dust.
Common mistakes when putting on an overgrip ↑ index
Four mistakes that leave the grip wrinkled, gappy or too thick.
Pulling too hard: if you stretch the overgrip a lot it gets thinner and lasts less. Light, even tension.
Leaving gaps between turns: without overlap the grip shows and the overgrip slides. Overlap 2 or 3 mm.
Starting at the top: the narrow end goes at the bottom, at the butt cap; start the other way and the edge lifts.
Stacking several overgrips: each layer thickens the handle and adds weight; more than one or two can change how the racket feels.
When should you change the overgrip? ↑ index
When it slips, looks shiny or feels hard. How often depends on how much you play and sweat.
It slips or looks shiny: that is the clear sign. If you play two or three times a week, changing it every three or four weeks is usual.
You sweat a lot: change it sooner; a soaked overgrip loses its grip.
You compete: tournament players may change it even during a match.
We have had a physical shop in La Nucía (Alicante) since 2003 and carry more than 160 brands. If you are unsure how to wrap it or which overgrip suits you, drop by the shop or write to us and we will show you.
Types of overgrip: which to choose ↑ index
The fitting technique is the same for all of them; the feel changes.
| Type | Who it suits | What it gives you |
|---|---|---|
| Smooth (tacky) | Dry hands | Tacky feel and good control |
| Absorbent | Heavy sweaters | Holds sweat and keeps the grip |
| Perforated | Those who sweat or play in the heat | More breathable |
| Cushioned (comfort) | Those after comfort | More cushioning in the hand |
Three overgrips in stock today in the shop ↑ index
Two packs of three, one of them ultra-thin, and one of twelve, so you can see the difference in real products.
Babolat Comfort Padel
REF 222193 · EAN 3324922385418- Surface: Smooth, no perforations
- Technology: Comfort Feel
- Pack: 3 units
- Level: All levels
Smooth surface and Comfort Feel technology for a soft touch and a firm, stable grip. Pack of three, suitable for all levels according to its product page.
Tecnifibre Players ProFeel
REF 226662 · EAN 3490150200356- Technology: ProFeel
- Pack: 12 units
- Absorption: High
- Colour: White
Pack of twelve with ProFeel technology, high moisture absorption and a soft, tacky feel. The format for those who play often and want a fresh one always at hand.
Babolat VS Original
REF 195743 · EAN 3324921393841- Thickness: Ultra-thin (Feel Ultrathin)
- Pack: 3 units
- Absorption: Excellent
- Colour: Black
Ultra-thin for those who want to feel the racket grip as much as possible. According to its product page, they offer good sweat absorption and a natural, slightly tacky hold. Pack of three.
Check each product page before deciding. If you prefer more options, you will find all the grips and overgrips in the shop.
Data and stock as of 01/10/2026; they may change.
“Which overgrip suits me if I sweat a lot?” According to its product page, the Tecnifibre Players ProFeel has high absorption; and in the table above, the absorbent and perforated types are the ones meant for people who sweat. If in doubt, write to us and we will help you choose.
“Can I put the new one over the old one?” Better not: take the old one off and put the new one over the original grip. Each layer thickens the handle and adds weight.
“Should I get the pack of three or the pack of twelve?” The twelve is for people who play often and want a fresh one always to hand; the packs of three are enough to try the feel.
Frequently asked questions ↑ index
Where do you start when putting on an overgrip?
With the narrow end, the one with the adhesive, stuck to the base of the handle next to the butt cap. From there you wrap upwards in a spiral to the end.
How much should each turn of the overgrip overlap?
Between 2 and 3 mm. With less there are gaps and with more the handle gets too thick.
Do you have to remove the grip before putting on the overgrip?
No. The overgrip is wrapped over the original grip; you only remove the previous overgrip if there is one.
How do you fix the end of the overgrip?
With the adhesive tape that comes in the pack, after cutting the excess, so that no edge lifts.
How often should you change the overgrip?
It depends on how much you play and sweat. Anyone playing two or three times a week usually changes it every three or four weeks, or sooner if it slips.
Can you put on two overgrips at once?
You can, but each layer thickens the handle and adds weight. One is usual; more than two can change how the racket feels.
Quick glossary ↑ index
Tienda Padelpoint verdict ↑ index
If you keep just one idea, make it this one: start at the narrow end, at the bottom, and wrap upwards in a spiral with a 2 to 3 mm overlap. That alone puts you ahead of most players.
And if you keep two, the second is that a well-wrapped overgrip lasts longer and you notice it in your hand from the first point: do not rush when putting it on.
We have been at this since 2003 and the conclusion has not changed: the overgrip is the cheapest thing to change and the one you feel most when playing.
We ship from our shop in La Nucía (Alicante, Spain) to the United Kingdom in 3–5 working days, with a minimum order required; the UK is outside the EU, so duties or customs charges may apply on delivery. We also ship to Ireland. Costs, the free-shipping threshold and all the conditions are on our shipping page; returns and exchanges cover mainland Spain, the Balearic Islands and mainland Portugal (see our returns and exchanges page), so from the UK ask us before you order.
